Tag: Spicify

Using Topaz Adjust to Process Vintage Tin Photos

Posted on October 11, 2013 by Nick Roberts

Click on the image to enlarge it in another window.

On my motorcycle ride up US 31 yesterday I came across a 1940 Chevrolet sedan sitting outside BABBS Auto Collision Center in Sellersburg Indiana. It was around 12 o’clock and the sun was pretty high in the sky which is almost always regarded as a poor time to shoot anything. I decided to stop anyway and shoot some rusty vintage tin for processing with Topaz Adjust. I knew from experience that the Spicify preset in Topaz Adjust would reveal a rainbow of iridescent colors in weathered dark paint that is streaked with iron oxides from the rust around it. As you can see I was well rewarded and captured some incredible textures and colors in this image. I finished it with a small black border that just felt right to me when I applied it.

Click on the image to enlarge it in another window.

Here’s another version of the same car from another frame that I captured with a normal exposure value. The previous image started out as a 2 stops underexposed frame and this normal exposure produced even more iridescence when the Spicify preset was applied in Topaz Adjust. As with the previous image I added that small black border I have come to like for these sorts of images.

Click on the image to enlarge it in another window.

Same basic processing as the two previous images using Topaz Adjust and the Spicify preset.

==========================================================

I have an affiliate relationship with Topaz Labs, and earn a small commission on any sales that are made by using the Topaz Labs link below, which helps support this site. Even if you aren’t ready to make a purchase you can use the link to access a Free 30 day Trial of Topaz Labs products to determine whether or not they will fit your own digital workflow.

http://www.topazlabs.com/705.html

==========================================================

Excavator Teeth

Posted on October 9, 2013 by Nick Roberts

Click on the image to enlarge it in a new window.

Sometimes the simplest approach to processing with plug-ins can yield good results without a lot of time consuming steps. A case in point is this image that I used Topaz Adjust on to create a faux HDR version. I worked with the zero EV frame and applied the Spicify preset. I then tweaked the sliders in Spicify to get the texture and contrast I wanted, then I returned it to Aperture 3 and sharpened it for the final image you see here. While in Topaz Adjust I also added a small black border that, to my thinking, helps isolate the image on the page.

==========================================================

http://www.topazlabs.com/705.html

==========================================================

Topaz Clarity vs Topaz Adjust

Posted on May 23, 2013 by Nick Roberts

Click on the image to enlarge it in a new window.

Today I decided to go back to an image I posted a few days ago that I had processed in Topaz Adjust. I have always liked the effect that Topaz Adjust has when applied to these sorts of rusted relics. I usually apply the Spicify preset and then tweak it to achieve the final result. The one thing that I have always struggled with when using that method was the extreme halos that arose when pushing contrast, saturation and definition to enhance the texture in the image.

Topaz Clarity is designed to allow enhancing texture, contrast and saturation while minimizing halos and similar artifacts. The image below shows haloing in the sky and around the edges of the tractor that are almost entirely gone in the Topaz Clarity processed image. From these two images it seems clear that they have accomplished their goal. I was able to open up the shadows and saturate the colors without getting the types of halos that the Topaz Adjust version below exhibits.

Click on the image to enlarge it in a new window.

From this experiment I can say Topaz Clarity lives up to it’s billing. I’m sure that as I become more familiar with the software I’ll be able to create images that reflect my vision for them while avoiding having to go into additional processing to deal with halos. I think Topaz Clarity is a valuable addition to my processing software and recommend it to anyone looking for a program that will give great control to contrast and color in single frame images.

==================================================

Topaz Clarity will retail for $49.99, but will be available at a special reduced price of $29.99 through May 31st with with this promo code: claritynew

Please use the Topaz link below when going to the Topaz Labs site.

http://www.topazlabs.com/705.html

I’m an affiliate of Topaz Labs and earn a small commission on any sales made through my referral link which helps me offset the cost of producing SpeedDemon2.

======================================================

Cawker, Kansas Tractor

Posted on May 2, 2013 by Nick Roberts

Click on the image to enlarge it in another window.

Here’s another image from Cawker, Kansas. I chose this one because I like the composition with the wheel coming forward in the frame as if it is on the verge of entering the viewer’s space. I had a polarizer on my Nikkor 12-24 mm lens which really cut down on the glare and saturated the colors before any processing was done. The sun was almost directly overhead but by using Topaz Adjust with the Spicify preset I was able to bring out the texture and patina on this tractor.

One thing I currently strive for is to keep from overdoing the texture in these types of images. I like bold color but I try to avoid getting too much texture when applying the various filters to my Topaz work. I wasn’t always so restrained and when I go back to some of my earliest examples I wonder how I could have been so heavy handed with the software back then. I also credit Topaz Labs for refining their entire line of software and giving us the tools to take greater control of the various filters in it. As with many skills in photography the more one uses a given technique, or tool, the better one gets with it and they evolve into becoming a better photographer.

===========================================================

Memo From the Department of Shameless Self Promotion

I am still accepting participants for my next HDR Workshop on May 17-18, 2013 here in Louisville. The last session was a great success; the participants all felt that it was time well spent and were applying the things they learned the next day. Here’s a link to the sign up page at Outdoor Photo Gear.

http://outdoorphotogear.ticketleap.com/using-hdr-photography/

Alabama Morning

Posted on July 28, 2012 by Nick Roberts

These Fords were in a wrecking yard in Alabama a couple of years ago. The cars I find in the southern states have a much different patina of rust on them than the cars out west of the Mississippi River do. The climate in the south is much more humid and therefore the rust is more agressive. The oxidation process creates a much rougher surface which in turn traps more moisture that then eats away at the metal more aggressively.

I liked the way the early morning sun was lighting the scene and how it really emphasized the texture on the 1949 Ford in the foreground. The contrast of the smooth chrome and glass in the headlights really caught my eye. The cars are framed to in a typical rule of thirds composition and the rust on the roof in the background draws the viewer’s eye back in the scene while reinforcing the colors of the cars.

There wasn’t much I needed to do in processing to get this image finished. I used a little of the Spicify preset in Topaz Adjust to punch up the texture and saturate the colors before returning the image to Aperture 3 for final sharpening and output.

Speeddemon2 Photography

Fine Art Photography

Tag: Spicify

Using Topaz Adjust to Process Vintage Tin Photos

Excavator Teeth

Cawker, Kansas Tractor

Alabama Morning